ترانسمیتر وزن DAT 400 پاونه Pavone Sistemi

ترانسمیتر وزن مدل DAT 400 محصول شرکت پاونه Pavone Sistemi ایتالیا است. ترانسمیترهای توزین سریDAT پاونه شامل مدل های DAT100 DAT200 DAT400 DAT500 DAT1400 قابلیت اتصال شبکه های پروفینت، پروفیباس و اترنت را دارد. شرکت ایده و فرآیند آریو با توجه به داشتن تخصص در این زمینه توانایی مشاوره و تامین محصولات شرکت Pavone Sistemi را دارد.
شرکت پاونه Pavone Sistemi  یک شرکت در زمینه محصولات توزین و اندازه گیری شامل لودسل، ترانسمیتر وزن و نمایشگر وزن در ایتالیا است که این محصولات در صنایعی از جمله فولاد، کارخانه های سیمان و پتروشیمی کاربرد دارند. 
ترانسمیترهای وزن DAT  شرکت پاونه Pavone Sistemi شامل مدل های  DAT100 DAT200 DAT400 DAT500 DAT1400  قابلیت اتصال شبکه های پروفینت، پروفیباس و اترنت را دارد.
DAT 400
The DAT 400 weight transmitter is an exclusive product of Pavone Sistemi that guarantees high performance and reliability. It has an upload and download function for programming with Tester 1008. Configuration and calibration can be set up from the front panel or from a PC via the USB port. The bipolar option is available on request. The DAT 400 weight transmitter can be customized according to customer needs. It has a peak hold function for dynamic measures and screw terminal blocks.
Technical Specifications
Measuring range: -0.5 ÷ +3.5 mV/V (-3.9 ÷ +3.9 mV/V optional)
Input sensitivity: 0.02 µV/count
Full scale non-arity: 0.01%
Gain drift: 0.001% FS/°C
Display: 6 digit red LED (7 segments) h 14 mm
A/D Converter: 24 bit
Internal Resolution: 16.000.000 points
Trasducer input voltage: 5 V (max 6 load cells 350 Ohm)
Visible resolution (in divisions): 60000
Divisions value (adjustable): x1 x2 x5
Decimal figures range: 0 ÷ 3
Temperature range: -10 ÷ +50°C (max umidity 85% without condensation)
Storage temperature: -20 ÷ +70 °C
Filter: 0.1 ÷ 25 Hz
Logic output: 2 Solid-state relays (maximum load 24 Vdc / 100 mA each)
Logic input: 2 optoisolated 24 Vdc PNP (External voltage)
Serial port: Nr. 2 - USB/RS232C RS422/485 with ASCII or Modbus RTU protocols
Power supply: 24 Vcc ±15% - power 5 W
Regulatory compliance: EN61326-1 EN55011 EN55014 for EMC; EN61010-1 for electrical security
Baud rate: 2400 9600 19200 38400 115200 adjustable (RS232)
Transmission distance: 15m (RS232C) 1000m (RS422; RS485)
Dimensions and weight: 106 x 90 x 58 mm (L x H x P); 250 g
محصولات شرکت پاونه
 
Load cells :
1000 (The compression load cell 1000 is precise and robust and it has been designed to meet the requirements of a wide range of industrial weighing applications: hoppers tanks platforms.)
2000 (The compression load cell 2000 is made of stainless steel and it has excellent characteristics of precision and robustness.)
CC3 (The CC3 Compression Load Cell has been designed to meet the requirements of a wide range of industrial weighing applications it has excellent accuracy and robustness thanks to the stainless steel construction…)
60001 (The tension load cell 60001 has been designed for the industrial weighing of small tanks and hoppers. )
60050 (The tension and compression load cell 60050 (also known as traction or S-type load cell) has been designed for the industrial fiscal weighing of small tanks and hoppers.)
PSTR (The PSTR tension load cell is made of stainless steel and is ideal for tensile loads and suspended loads for measuring tensile forces for dynamometric measurements and as a load limiting device for… )
65023 (The 65023 shear beam load cell made of nickel-plated steel and stainless steel has watertight protection for use in harsh environmental conditions excellent arity and precision characteristics…)
65083 (The 65083 shear beam load cell has been designed for the weighing of hoppers and tanks and for the construction of low profile platforms it has excellent characteristics of arity precision and resistance… )
PSD800 (The PSD800 shear beam load cell made of stainless steel and hermetically sealed is suitable for platforms hoppers and pallets. )
DDR (The DDR double shear beam load cell made of stainless steel and with fully welded hermetic seal is suitable for weighing tanks and silos and has a 12 m shielded 6-conductor cable for electrical connection.… )
DSBZ (The double shear beam load cell DSBZ guarantees high precision and is insensitive to lateral loads. For this reason it is suitable for heavy industrial weighing such as trucks and large heavy vehicles.… )
PRR (The PRR double shear beam load cell made of stainless steel with watertight protection has a low profile and is perfect for working in hostile environments and heavy industries such as the steel industry.… )
1320 (The off center load cell 1320 made of aluminum is ideal for large-scale single-cell platforms dynamometers and weight controllers. This load cell maintains precision in any position the object is loaded… )
C2D1 (The off center load cell C2D1 can be used in different sectors as it maintains precision even where the loads are not well centered and static it is characterized by high accuracy and low pressure. )
C2G1 (The Off Center C2G1 load cell is capable of weighing while maintaining high precision and maximum reliability even with off-center loads and is particularly suitable for the construction of industrial… )
ALPHA (The bending beam load cell ALPHA has excellent precision in small dimensions is easy to install has a high temperature range of use and is equipped with a shielded 4-conductor cable 1.5 meters long… )
BBF (The bending beam load cell BBF is welded and built in stainless steel has a thermal seal and has been designed for weighing tanks hoppers belts platforms single-cell systems suspended loads and…)
BBR (The bending beam load cell BBR is made of stainless steel is completely welded and has a thermal seal. )
GIPE3000 (The GIPE3000 pin load cell made of stainless steel is ideal where it is necessary to measure the lifting force.)
PSPRX (The PSPRX pin load cell is made of stainless steel and offers maximum resistance to impacts and overloads.)
C2G1 HT (The C2G1 HT load cell is suitable for high temperatures and it is particularly suitable for the construction of industrial and bench scales piece counters and packaging machines.)
CMH HT (The CMH HT load cell built in stainless steel has been designed for the industrial weighing of silos tanks ladles etc.)
CVS HT (The CVS HT cell made of steel has been designed for the measurement of forces and works both in tension and compression.)
PSRT (The PSRT toroidal annular load cell made of stainless steel is used to check the stringing of tie rods or bolts for rock or soil riveting. )
CS20 (The CS20 S-type (tension and compression) load cell has been designed for the industrial fiscal weighing of small tanks and hoppers )
CS30 (The CS30 S-type load cell made of stainless steel has been designed for the industrial and fiscal weighing of small tanks and hoppers)
CVF (The universal CVF load cell is made of stainless steel and it has excellent arity and precision characteristics )
DSA-R (The BLH NOBEL DSA-R load cell is made of galvanized steel it has a variable load capacity according to customers needs and the temperature ranges from -40 ° C to + 150 ° C.)
KIM-1 (The BLH NOBEL KIM-1 load cell is extremely precise and robust it is resistant to very high lateral forces it has a moveable loading point and it is easy to install. )
KIMD-1 (The BLH NOBEL KIMD-1 load cell is easy to install and it needs no additional mounting accessories. The KIMD-1 cell is suitable for weighing big loads and has a movable load point. )
1006 (Model 1006 is a very low capacity high precision single point load cell designed for direct mounting in low capacity scales. )
1010/1015 (The Model 1010 is a single-point load cell designed for direct mounting of low cost low capacity weighing platforms. )
1022 (The Model 1022 is a low proile single-point load cell designed for direct mounting in low cost weighing platforms. )
MKX (MKX is a mounting accessory invented by Pavone Systems who developed this product thanks to his previous experience and know-how. )
MH MOUNTING KIT (MH MOUNTING KIT is an assembly accessory that is easy to assemble and ideal for weighing roller conveyors platforms hoppers and tanks.)
DE MOUNTING KIT (DE MOUNTING KIT unique in its kind represents an excellent solution for complex situations where precision and strength are required. )
LEVERMOUNT (LEVERMOUNT is the most recent and innovative mechanical assembly system for load cells for industrial weighing systems. )
MASTERMOUNT (The MASTERMOUNT weighing module is an aesthetically appealing product; it has a double shear beam load cell made of stainless steel and a built-in mounting component. )
PERMOUNTING (The PERMOUNTING weighing module has a pin load cell (double shear beam operation) made of fully welded steel and a built-in mounting component. )
 
Weight Transmitters :
DAT 11 (Among the weight transmitters DAT 11 is the fastest to receive convert and transmit data thanks to a more performing A/D converter. )
EL5 )The brand new EL5 weight transmitter can be used in any industrial weighing system with the purpose of regulation and supervision. Practical fast flexible suitable for systems up to 8 load cells. )
UWT 6008 (The UWT 6008 weight transmitter comes from the Pavone Systems experience. It is a unique 
DAT 1400 ( The DAT 1400 weight transmitter has a mechanical keyboard removable screw terminal blocks and a peak hold function for dynamic measures. )
DAT 100 RS485 (The DAT 100/RS485 product is a weight transmitter which guarantees high performance and long-term reliability. )
DAT 200 Profibus (The weight transmitter DAT 200 Profibus guarantees high performance and long-term reliability. Configuration and calibration can be set up directly from the front panel. )
DAT 400m (The DAT 400 weight transmitter is an exclusive product of Pavone Sistemi that guarantees high performance and reliability. It has an upload and download function for programming with Tester 1008.)
DAT 400 PBL (The DAT 400 PBL weight transmitter is an innovative and exclusive product by Pavone Sistemi that can be customized. )
DAT 400 PBS (The DAT 400 PBS weight transmitter is an innovative and exclusive product by Pavone Sistemi that can be customized. )
DAT 500 (The DAT 500 weight transmitter guarantees high performance and long-term reliability. It is equipped with several optionals: upload and download functions for programming with TESTER 1008 the connection… )
AT 08 (The weight transmitter AT 08 is the ideal product for applications with minimal system tare such as pressure platforms or transducers.)
AT 10 (The AT 10 weight transmitter has a 20-pole terminal block for the connection of 4 load cells and a 20 ÷ 28 Vdc power supply. The input signal ranges from 3 to 30mV. )
E LINK 3000 (The weight transmitter E LINK 3000 can be integrated into any industrial regulation and supervision system. )
I-BOX 2000 (The I-BOX 2000 weight transmitter is the effective economic alternative to digital load cells: it replaces the analog junction cards it simplifies installation and it speeds up the system calibration)
UWT 600 (UWT 600 is a reliable weight transmitter that guarantees high performance. The product is customizable and can be equipped with different options depending on the purpose of use. )
A.D. SYSTEM (A.D. SYSTEM (Advances Digital System) is a weight transmitter that allows the digital management of analog load cells. )
 
Weight Indicators :
MCT 1302 (The MCT 1302 touch screen weight indicator is ideal for all types of weighing in particular for static weighing and loading / unloading and multi-component dosing. )
MCT S 1302 (ATEX 222) (The MCT S 1302 atex and stainless steel is a touch screen weight indicator ideal for every type of weighing in particular for static weighing and loading / unloading and multi-component weighing. )
MC 102 (The MC 102 weight indicator is small easy to assemble and programmable from the keyboard. It has removable screw terminal blocks and it guarantees high accuracy at a very low cost. )
MC 302 (The product MC 302 is a weight indicator that satisfies various needs in the weighing field from the management of thresholds to dosage. )
PKD 2000 (The PKD 2000 weight indicator is versatile and suitable for all types of weighing in the industrial sector as it can be customized according to the purpose of use. )
PKD 3000 (The PKD 3000 weighing instrument is a multifunction weight microcontroller used in industrial systems. )
PSVIS HE 60 (The weight indicator PSVIS HE 60 has an input for load cells a 6-character numerical display a stainless steel container and watertight connections.)
PSVIS HE 100 (PSVIS HE 100 is a weight display for stainless steel load cells with watertight connections. The display of the PSVIS HE 100 weight indicator makes it possible to read the content from 35 m distance and… )